P032

Setting the Paper Source for Plain Paper

When you select Automatically Select from Paper Source, you can use the printer driver to select the paper source for plain paper.

The procedure for setting the paper source is as follows:

Paper Source Setting for Plain Paper

  1. Open the printer driver setup window

  2. Click Paper Source Setting for Plain Paper on the Maintenance tab

    The Paper Source Setting for Plain Paper dialog box opens.

    Note

    • If the machine is off or bi-directional communication is disabled, a message may appear because the computer cannot collect the machine status.
      If this happens, click OK to display the most recent settings specified on your computer.

  3. Apply the settings

    Select the paper source for plain paper, and then click OK.

    The selected settings are enabled hereafter.

Important

  • The descriptions in the machine manual assume that the plain paper is supplied from the cassette. When you change the paper source setting, replace all instances of "cassette" with the new paper source.

Page top