You can print out the network settings of the machine such as its IP address and SSID.
Important-
This print out contains valuable information about your computer. Handle it with care.
-
Make sure that the machine is turned on.
-
Load a sheet of A4 or Letter-sized plain paper.
-
Select
Setup on the HOME screen. -
Select
Device settings, then use the OK button to confirm the selection. -
Use the
button to select LAN settings, then use the OK button to confirm the selection. -
Use the
button to select Confirm LAN settings, then use the OK button to confirm the selection. -
Use the
button to select Print LAN details, then use the OK button to confirm the selection. -
Use the
button to select Yes, then use the OK button to start printing.The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
For MG6200 series/MG8200 series
Item
Explanations of the item
Setting
Wireless LAN
Wireless LAN
Enable/Disable
Link Status
Status of the Wireless LAN
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
SSID
SSID
SSID of the wireless LAN
Connection Mode
Connection Mode
Infrastructure
Channel
Channel
XX (1 to 13)
Encryption
Method of the Encryption
none/WEP/TKIP/AES
WEP Key Length
WEP Key Length
Inactive/128/64
Authentication
Method of the Authentication
none/auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength
Signal Strength
0 to 100 [%]
TCP/IP Version
TCP/IP Version
IPv4/IPv6
IP Address
Selected IP Address
XXX.XXX.XXX.XXX
Default Gateway
Default Gateway
XXX.XXX.XXX.XXX
Subnet Mask*1
Subnet Mask
XXX.XXX.XXX.XXX
Subnet Prefix Length*2
Subnet Prefix Length
XXX
IPsec*3
IPsec setting
Active
Security Protocol*3
Method of the Security Protocol
ESP/ESP & AH/AH
Wired LAN
Wired LAN
Enable/Disable
Link Status
Status of the Wired LAN
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
TCP/IP Version
TCP/IP Version
IPv4/IPv6
IP Address
IP Address
XXX.XXX.XXX.XXX
Default Gateway
Default Gateway
XXX.XXX.XXX.XXX
Subnet Mask*1
Subnet Mask
XXX.XXX.XXX.XXX
Subnet Prefix Length*2
Subnet Prefix Length
XXX
IPsec*3
IPsec setting
Active
Security Protocol*3
Method of the Security Protocol
ESP/ESP & AH/AH
Printer Name
Printer name
Printer name (Up to 15 characters)
Shared Memory Card
Memory card sharing
Enable/Disable
WSD
WSD setting
Enable/Disable
WSD Timeout
Timeout
1/5/10/15/20 [min]
LPR Protocol
LPR protocol setting
Enable/Disable
Bonjour
Bonjour setting
Enable/Disable
Bonjour Service Name
Bonjour service name
Bonjour service name (Up to 52 characters)
DNS Server
Getting DNS Server automatically
Auto/Manual
Primary Server
Primary server address
XXX.XXX.XXX.XXX
Secondary Server
Secondary server address
XXX.XXX.XXX.XXX
Proxy Server
Proxy Server setting
Enable/Disable
Proxy Port
Specifying Proxy Port
1 to 65535
Proxy Address
Proxy Address
XXXXXXXXXXXXXXXXXXXX
IP Address Filtering
IP Address Filtering
Enable/Disable
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
*1 Only when IPv4 is selected for TCP/IP settings, the status of the network is printed.
*2 Only when IPv6 is selected for TCP/IP settings, the status of the network is printed.
*3 Only when IPv6 is selected for TCP/IP settings and Active is selected for IPsec settings, the status of the network is printed.
For MG5300 series/MG4100 series
Item
Explanations of the item
Setting
Wireless LAN
Wireless LAN
Enable/Disable
Link Status
Status of the Wireless LAN
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
SSID
SSID
SSID of the wireless LAN
Connection Mode
Connection Mode
Infrastructure
Channel
Channel
XX (1 to 13)
Encryption
Method of the Encryption
none/WEP/TKIP/AES
WEP Key Length
WEP Key Length
Inactive/128/64
Authentication
Method of the Authentication
none/auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength
Signal Strength
0 to 100 [%]
TCP/IP Version
TCP/IP Version
IPv4/IPv6
IP Address
Selected IP Address
XXX.XXX.XXX.XXX
Default Gateway
Default Gateway
XXX.XXX.XXX.XXX
Subnet Mask*1
Subnet Mask
XXX.XXX.XXX.XXX
Subnet Prefix Length*2
Subnet Prefix Length
XXX
IPsec*3
IPsec setting
Active
Security Protocol*3
Method of the Security Protocol
ESP/ESP & AH/AH
Printer Name
Printer name
Printer name (Up to 15 characters)
Shared Memory Card
Memory card sharing
Enable/Disable
WSD
WSD setting
Enable/Disable
WSD Timeout
Timeout
1/5/10/15/20 [min]
LPR Protocol
LPR protocol setting
Enable/Disable
Bonjour
Bonjour setting
Enable/Disable
Bonjour Service Name
Bonjour service name
Bonjour service name (Up to 52 characters)
DNS Server
Getting DNS Server automatically
Auto/Manual
Primary Server
Primary server address
XXX.XXX.XXX.XXX
Secondary Server
Secondary server address
XXX.XXX.XXX.XXX
Proxy Server
Proxy Server setting
Enable/Disable
Proxy Port
Specifying Proxy Port
1 to 65535
Proxy Address
Proxy Address
XXXXXXXXXXXXXXXXXXXX
IP Address Filtering
IP Address Filtering
Enable/Disable
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
*1 Only when IPv4 is selected for TCP/IP settings, the status of the network is printed.
*2 Only when IPv6 is selected for TCP/IP settings, the status of the network is printed.
*3 Only when IPv6 is selected for TCP/IP settings and Active is selected for IPsec settings, the status of the network is printed.
