You can print a photograph saved on a memory card or USB flash drive onto the disc label of the printable disc.
Important-
You cannot print on 3.15 inches / 8 cm printable discs.
-
Do not attach the disc tray or place the printable disc until the message asking you to set them is displayed. Doing so can damage the machine.
-
Make sure that the machine is turned on.
-
Select
Disc label on the HOME screen. -
Insert the memory card into the card slot or insert the USB flash drive into the direct print port.
Important-
You cannot use the memory card and USB flash drive at the same time.
Note-
If you insert the memory card/USB flash drive before you select Disc label on the HOME screen, the photo selection screen in Photo is displayed.
If both photo files and PDF files are saved on the memory card/USB flash drive, the confirmation screen to select which file you print is displayed.
To display the HOME screen, press the HOME button.
-
-
Select
Print from photo files, then press the OK button.The print area setting screen is displayed.
Note-
If no printable photo data is saved on the memory card/USB flash drive, Data of supported types are not saved. is displayed on the LCD.
-
If more than 2,000 photo data are saved on the memory card/USB flash drive, the photo data is split by group per 2,000 photos in reverse chronological order (date last modified) automatically. Check the message displayed on the LCD, then press the OK button.
-
-
Change the print area, then press the OK button.
Use the
button to select Outer circle or Inner circle and use the 
button to change the print area.Note-
Measure the outer and inner diameters of the printing surface of the printable disc and make sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
-
For information on printable discs, contact their manufacturers.
-
-
Use the
button to select a printable disc type, then press the OK button.Note-
If your printable disc is the recommended disc, specify Recommended disc for the suitable density printing. If not, specify Other disc.
-
-
Use the
button to select the photo to print, then press the OK button.Note-
Other options
-
-
Specify the print area with trimming.
Use the following buttons to trim the print area.
- , , , and buttons:
-
Positions the trimming frame.
- + or - buttons, or Scroll Wheel:
-
Sets the trimming frame size.
-
Press the OK button to finalize your selection of trimming area.
The print setting confirmation screen is displayed.
-
Check the print settings, then press the Color button.
-
Follow the on-screen instructions to set the printable disc.
Note-
You can see the procedure to set the printable disc by pressing the left Function button. The next screen is displayed by pressing the OK button. Additionally, pressing the Stop button returns to the print confirmation screen.
-
For details on how to set the printable disc:
-
-
Press the OK button.
The machine starts printing.
Note-
Press the Stop button to cancel printing.
-
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.
-
To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously. To stop the printing operation, detach the disc tray from the machine, then close the inner cover (the cover of the disc tray). After approximately three minutes have elapsed, open the inner cover, attach the disc tray to the machine, then resume printing.
-
If printing is misaligned, adjust the printing position using Adjust disc print area in Print settings under Device settings.
-
