U004

Printing Photo with Trimming

You can edit photo displayed on the LCD by trimming them and print.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Load photo paper in the rear tray.

    Loading paper

  3. Select Advanced photo on the HOME screen.

    LCD and Operation Panel

  4. Insert the memory card into the card slot or insert the USB flash drive into the direct print port.

    Inserting the Memory Card

    Inserting the USB Flash Drive

    Important

    • You cannot use the memory card and USB flash drive at the same time.

    Note

    • If you insert the memory card/USB flash drive before you select Advanced photo on the HOME screen, the photo selection screen in Photo is displayed.

      If both photo files and PDF files are saved on the memory card/USB flash drive, the confirmation screen to select which file you print is displayed.

      To display the HOME screen, press the HOME button.

  5. Select Trimming print, then press the OK button.

    Note

    • If no printable photo data is saved on the memory card/USB flash drive, Data of supported types are not saved. is displayed on the LCD.

    • If more than 2,000 photo data are saved on the memory card/USB flash drive, the photo data is split by group per 2,000 photos in reverse chronological order (date last modified) automatically. Check the message displayed on the LCD, then press the OK button.

  6. Use the LEFTRIGHT button to select the photo to print, then press the OK button.

    Note

  7. Trim the print area.

    figure: LCD

    Use the following buttons to trim the print area.

    UP, DOWN, LEFT, and RIGHT buttons:

    Positions the trimming frame.

    + or - buttons, or Scroll Wheel:

    Sets the trimming frame size.

    Left Function button:

    Changes the aspect ratio of the trimming frame.

    Center Function button:

    Rotates the trimming frame. To switch the trimming frame between portrait and landscape orientations, press this button.

  8. Press the OK button to finalize your selection of trimming area.

    The area to be cropped is specified, and the print setting confirmation screen is displayed.

  9. Specify the settings as necessary.

    Setting Items

  10. Press the Color button.

    The machine starts printing.

    Note

    • To cancel printing, press the Stop button.

    • You can add the print job by pressing the right Function button while printing.

      Adding the Print Job

    • The trimming image cannot be newly saved on the memory card/USB flash drive.

    Page top